Continuous Casting Machine Series
R6m Small-billet Continuous Casting Machine
ApplicationAs a regular model for the production of billets, R6m Small-billet
Continuous Casting Machine can be subdivided into 3 categories:
2-machine and 2-flow, 3-machine and 3-flow as well as 4-machine and
4-flow, with production cross-section being 120×120、150×150mm2,
Steel productions come out into straight carbon steel, low-alloy
steel and improved carbon structural steel.
Structural featureslow equipment height, fast pulling speed, high production,
minimized equipment maintenance and a capability of working
together with electric arc furnace, rotary furnace and intermediate
frequency furnace to produce quality billets with annual
single-flow output being 10-15million tons.
Equipment compositionrevolving platform or buggy ladle, pouring box, pouring box ladle,
pouring box spill swaying slot, crystallizer shield, oscillation
device for slab crystallizer, bearing devices for suspending
operation box, bi-cooling spray system, straightening machine for
casting blank guided section, dummy bar, dummy bar storage device,
roller bed steel pusher, water system, bi-cooling steam-extraction
system and hydraulic station of electronic control.
Major technical parameters of casting machine
| Serial No. | Item | Unit | Technical parameters |
| 1 | Continuous casting model | | Continuous straightening full arc model |
| 2 | Basic arc radius | m | 6 |
| 3 | Fluxion | | 2、3、4 |
| 4 | Designed annual production | million tons | 10～15 |
| 5 | Casting cross-section | mm2 | 120×120～150×150 |
| 6 | Metallurgical length | m | ～20 |
| 7 | Specified length | m | 3～9 |
| 8 | Working pulling speed | m/min | 2.5 |
| 9 | Maximum pulling speed | m/min | 4 |
| 10 | Steel output per hour | ton | 15 |
| 11 | Straightening mode | | Continuous straightening mode |
| 12 | Dummy bar | | Rigidity dummy bar |
| 13 | Power consumption | kw/ton | 6 |
Five-minor Continuous Casting Machine
ApplicationIt is a small-scale casting machine specially designed for
small-sized steel plants of intermediate and low frequency furnace
die casting to gear to national policies. It is mainly used to
produce billets of 80×80,90×90,100×100,120×120mm2.
Structural featuresLow height, limited space occupation, small production
cross-section, low production cost and minimized equipment
investment.
Equipment compositionPouring box/ spill swaying slot/ shield and slab cover for
crystallizer/ bi-cooling spray system/ casting blank guided
section/ withdrawal straightening machine/ dummy bar/ dummy bar
storage device/ roller bed/ cold bed/ steel pusher/ water system/
electricity control/ hydraulic station.
Major technical parameters of casting machine
| Serial No. | Item | Unit | Technical Parameters |
| 1 | Continuous casting model | | Continuous straightening full arc model |
| 2 | Basic arc radius | m | 5.25 |
| 3 | Fluxion | | 1 |
| 4 | Designed annual production | million tons | 3～5 |
| 5 | Casting cross-section | mm2 | 80×80～120×120 |
| 6 | Metallurgical length | m | ～10 |
| 7 | Specified length | m | 3 |
| 8 | Working pulling rate | m/min | 1.8 |
| 9 | Maximum pulling rate | m/min | 2.5 |
| 10 | Steel output per hour | ton | 8～12 |
| 11 | Straightening mode | | Continuous straightening |
| 12 | Dummy bar | | Rigidity dummy bar |
| 13 | Casting machine height | M | 7 |
| 14 | Space occupation | M2 | 5×20 |
| 15 | Installed capacity | kw | 37＋60 (water pump) |
| 16 |
